Inquiry
Leave Your Message

SCSWG2-241608MU Series

24 Port 1G L3 Managed Industrial Ethernet Switch Series

◆ Features 568Gbps switching capacity and 248Mpps wire-speed forwarding performance
◆ Supports static routing, RIP and OSPF for Layer 3 cross-segment data forwarding
◆ Adopts mainstream network functions: QoS, VLAN, DHCP, LACP, RMON, IGMP and IPv6
◆ Supports SNMP, Console, Telnet and Web for flexible device management
◆ Adapts STP/RSTP/MSTP protocols and realizes ERPS fault recovery within 50ms
◆ Equipped with full-aluminum fanless enclosure, IP40 protection and 6kV lightning surge resistance for rack mounting
◆ Provides dual redundant power supply, supporting AC/DC 110V~265V and DC 48V~76V input
◆ Operates stably at -40℃ to 75℃ and allows safe storage at -40℃ to 85℃

    This device is equipped with comprehensive and complete network control capabilities, covering traffic priority scheduling, virtual local area network division, multicast snooping, dynamic VLAN registration and link bundling functions. It supports multi-version SNMP monitoring protocols, diversified spanning tree protocols and complete Layer 3 data forwarding services. In terms of multicast management, the device supports IGMP Snooping, MVR multicast VLAN registration and MLD Snooping functions to standardize multicast data transmission and improve network transmission efficiency. Adopting embedded ERPS ring redundancy mechanism, the device can complete link switchover and fault recovery within 50ms, which effectively improves the overall operating stability of the industrial network system.
    The device integrates multi-dimensional network security control mechanisms. It supports L2, L3 and L4-based ACL flow identification and filtering to achieve refined data access management. The device provides basic defense against common network abnormal traffic, including DDoS, TCP SYN Flood and UDP Flood traffic. It supports the processing and management of multicast, broadcast and unknown unicast traffic, and is equipped with practical security functions such as physical port isolation, port security control, as well as IP, MAC and port binding mechanism. It also supports DHCP Snooping and DHCP Option 82 attributes, which standardize terminal access behaviors and enhance network boundary security.
    The switch adopts DDM technology to realize real-time optical signal power monitoring, which supports continuous detection and status judgment of optical link operating conditions. It supports system configuration and maintenance through local serial port debugging, remote terminal access and web browser management platforms, and is compatible with mainstream SNMP-based centralized network management systems. Designed with a standard 1U cabinet installation structure, the device maintains stable operating performance in the ambient temperature range of -40℃ to 75℃. With IP40 housing protection specification, it can adapt to various complex and harsh industrial working environments for long-term stable deployment.

    model​

    SCSWG2-240816MU
    SCSWG2-241608MU​

    software function

    Exchange capacity

    568Gbps

    packet forwarding rate

    248Mpps

    MAC exchange

    Supports static configuration and dynamic learning of MAC addresses; supports to view and clear MAC addresses; MAC address aging time is configurable Support MAC address learning number limit; support MAC address filtering function;

    VLAN

    Up to 4096 VLAN; port based VLAN; 802.1Q standard VLAN; Support Voice VLAN; support MAC VLAN;

    spanning tree

    Support STP spanning tree protocol; support RSTP fast-generating tree protocol; support MSTP multi-spanning tree protocol;

    Ring network agreement

    Support the industrial-level ring network protocol ERPS

    Ring road protection

    Support for loop detection / loop avoidance

    Hostrom control

    Support IGMP Snooping; support MVR (Multicast VLAN Registration); Support for MLD Snooping (Multicast Listener Discovery Snooping);

    DHCP

    Support DHCP Client; support DHCP Snooping; support DHCP Relay;

    Storm suppression

    Support the suppression of broadcast, multicast, unicast, etc

    IPv4

    Support for static,RIP, OSPF routing;

    IPv6

    Support ICMPv6, DHCPv6, ACLv 6, IPv6 Telnet; support IPv6 neighbor discovery; support Path MTU discovery Support MLD v1 / v2; support MLD Snooping; support IPv6 static routing

    QoS

    Supports traffic classification based on the fields of L2 / L3 / L4 protocol header; supports CAR traffic restriction; and supports 802.1P/DSCP priority rekeling Support queue scheduling methods such as SP, WRR, SP + WRR; congestion avoidance mechanism such as WRED; and support traffic supervision and flow shaping

    Safety features

    Support the ACL flow identification and filtering safety mechanism based on L2 / L3 / L4; Support protection against DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc.; Support multicast, broadcast and unknown single broadcast; support port isolation; Support ports security, IP + MAC + port binding; support DHCP Snooping, DHCP Option 82;

    reliability

    Optional support power supply 1 + 1 backup; support static / LACP mode link aggregation, support link aggregation across service cards; support ERPS ring network protection;

    system maintenance

    Support configuration file upload / download; support upgrade package upload; support WEB to restore factory configuration; Support system log function; support Ping; support cable detection; optical module information viewing;

    administration of networks

    Support WEB interface management (support http and https protocol); support CLI interface management; support Telnet remote management; Support SSH 2.0; support SNMP network management; support RMON; support LLDP; support NTP client;
    specifications of the products

    Port description

    Series 1
    8*10 / 100 / 1000 Base-T Ethernet electrical ports;
    16*1000 Base-GX interface SFP light ports
    Series 2
    16*10 / 100 / 1000 Base-T Ethernet Electrical Ports;
    8*1000 Base-GX Interface SFP Light Ports
     

    Mechanical parameters

    Physical size (length, width and height): 440mm*265mm*44mm Installation method: standard 1U rack type;
    Heat dissipation form: aluminum alloy single-ribbed chassis surface heat dissipation, no fan;
    Housing protection: IP40

    Internal box size

    49.5*34.5*9cm(1 units)

     carton size

    52cm*36cm*39cm(4 units)
     

    Status indicator light

    Operating indicator light: RUN;
    Power supply indicator lamp: PWR;
    Interface indicator lamp: Link, ACT (light port, electrical port)
     

    Power parameters

    Input voltage: double DC48~76V or double AC / DC110~265V or AC / DC110~265V, DC48~76V;
    Industrial terminal: 6P spacing 5.08mm insert terminal;
    Double power supply redundancy design, anti-reverse connection / overcurrent protection
     

    work environment

    Operating temperature: -40℃ ~ + 75℃;
    Storage temperature: -40℃ ~ + 85℃;
    Humidity: 5%~95% (no condensation)

    Quality Assurance

    MTBF >100000h;
    Warranty period: 5 years

    EMC standard

    EN61000-4-2 Anti-static electricity (ESD): ± 8kV contact discharge, ± 15kV air discharge;
    EN61000-4-3 Electromagnetic field: 10V/m(80-1000 MHz);
    EN61000-4-6 Anti-transmission: 3V (10 kHz ~ 150 kHz), 10V (150 kHz ~ 80 MHz);
    EN55022:EN55022 Class A
    image
    Available Models Gigabit Copper Port Gigabit SFP Power Supply
    SCSWG2-240816MU 8 16 90-264VAC(130-360VDC) Power Supply
    SCSWG2-240816MU-A2 8 16 90-264VAC(130-360VDC) Dual Power Supply
    SCSWG2-241608MU 16 8 90-264VAC(130-360VDC) Power Supply
    SCSWG2-241608MU-A2 16 8 90-264VAC(130-360VDC) Dual Power Supply

    Make An AppointmentLeave Your Message