Inquiry
Leave Your Message

SCI-SFP-FX-SM1310-20km

100M SFP Optical Module

◆ Adopts duplex LC interface and multi-source compatible design
◆ Maximum transmission speed reaches 155Mbps
◆ 1310nm FP laser, applicable for single-mode fiber transmission
◆ Powered by single 3.3V voltage supply
◆ Supports hot plug and play installation

    This optical module conforms to ITU-T G.957 and G.958 standard specifications. It adopts multi-source compatible packaging design and is equipped with a duplex LC connector, supporting a maximum data transmission rate of 155Mb/s. The module features a 1310nm FP laser, suitable for single-mode fiber transmission, and operates with a single +3.3V power supply while supporting hot-plugging function. In terms of safety performance, the product is designed in line with IEC60825-1 standards and meets Laser Class 1 eye safety requirements. Meanwhile, the whole product complies with RoHS environmental protection specifications.

    Electrical and Optical Characteristics: (Condition: Ta=TOP)
    Parameter Symbol Min. Typical Max. Unit
    Transmitter Differential Input Voltage +/-TX_DAT 200 1600 mV p-p
    Supply Current ICC 200 250 mA
    Tx_Disable Input Voltage – Low VIL 0 0.8 V
    Tx_Disable Input Voltage – High VIH 2 Vcc V
    Tx_Fault Output Voltage – Low VOL 0 0.8 V
    Tx_Fault Output Voltage – High VOH 2 Vcc V
    Receiver Differential Output Voltage +/-RX_DAT 400 1400 mV p-p
    Rx_LOS Output Voltage- Low VOL 0 0.8 V
    Rx_LOS Output Voltage- High VOH 2 Vcc V
    Transmitter
    Parameter Symbol Min. Typical Max. Unit
    Data Rate B - 155 - Mb/s
    Centre Wavelength λc 1260 1310 1360 nm
    Output Spectral Width △λ - - 4 nm
    Average Output Power Po -14 - -8 dBm
    Extinction Ratio EXT 9 - - dB
    Data Input Voltage-High VIHS Vcc-1.16 - Vcc-0.89 V
    Data Input Voltage -Low VILS Vcc-1.82 - Vcc-1.48 V
    Supply Current ICC - 90 110 mA
    Output Optical Eye Compliant with ITU-T G.957
    Receiver
    Parameter Symbol Min. Typical Max. Unit
    Receive Sensitivity Pmin - - -32 dBm
    Maximum Input Power PMAX -3 - - dBm
    Signal Detection-Asserted PH-L -45 - dBm
    Signal Detection-Deserted PL-H - -34 dBm
    Output High Voltage VOH Vcc-1.03 - Vcc-0.89 V
    Output Low Voltage VOL Vcc-1.82 - Vcc-1.63 V
    Operating Wavelength λc 1260 - 1580 nm
    Supply Current ICC - 80 110 mA
    Absolute Maximum Ratings: (TC=25℃)
    Parameter Symbol Min. Max. Unit
    Storage Temperature TST -40 85 ℃
    Operating Temperature Standard 0 70 ℃
    Industrial -40 85 ℃
    Input Voltage TCC 0 5 V
    Recommended Operating Environment:
    Parameter Symbol Min. Typical Max. Unit
    Supply Voltage VCC 3 3.3 3.6 V
    Operating Temperature Standard 0 - 70 ℃
    Industrial -40 - 85 ℃
    Timing Characteristics:
    Parameter Symbol Min. Typical Max. Unit
    TX_DISABLE Assert Time t_off 3 10 usec
    TX_DISABLE Negate Time t_on 0.5 1 msec
    Time to Initialize Include Reset of TX_FAULT t_int 30 300 msec
    TX_FAULT from Fault to Assertion t_fault 20 100 usec
    TX_DISBEL Time to Start Reset t_reset 10 usec
    Receiver Loss of Signal Assert Time (Off to On) TA,RX_LOS 100 usec
    Receiver Loss of Signal Assert Time (On to Off) Td,RX_LOS 100 usec
    Available Models
    Product Description
    SC-SFP-GX-SM1310-20km LC SFP, Single-Mode Dual-Fiber, 20km, 100Mbps, 1310nm,0°C~+70°C
    SCI-SFP-GX-SM1310-20km LC SFP, Single-Mode Dual-Fiber, 20km, 100Mbps, 1310nm,-40°C~+85°C
    SC-SFP-GX-SM1310-40km LC SFP, Single-Mode Dual-Fiber, 40km, 100Mbps, 1310nm,0°C~+70°C
    SCI-SFP-GX-SM1310-40km LC SFP, Single-Mode Dual-Fiber, 40km, 100Mbps, 1310nm,-40°C~+85°C

    Make An AppointmentLeave Your Message