- Industrial-Grade Switches
- Carrier-grade Switches
- Multifunctional Wireless Series
- Industrial Gateway Series
- Other Communication Products
This optical module features standard universal SFP structure and LC connector, supporting data transmission speed up to 155Mbps. It is designed with easy hot-swap function and runs on single 3.3V power input. With outstanding signal performance, it provides isolation above 30dB and crosstalk below -45dB for steady signal output. It maintains stable operation in the temperature range of -40℃ to 85℃, and meets industry design criteria including IEEE802.3Z and Bellcore TA-NWT-000983 requirements.
| Electrical and Optical Characteristics: (Condition: Ta=TOP) | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Transmitter Differential Input Voltage | +/-TX_DAT | 200 | 2400 | mV p-p | |
| Supply Current | ICC | 130 | 180 | mA | |
| Tx_Disable Input Voltage – Low | VIL | 0 | 0.8 | V | |
| Tx_Disable Input Voltage – High | VIH | 2 | Vcc | V | |
| Tx_Fault Output Voltage – Low | VOL | 0 | 0.8 | V | |
| Tx_Fault Output Voltage – High | VOH | 2 | Vcc | V | |
| Receiver Differential Output Voltage | +/-RX_DAT | 600 | 1400 | mV p-p | |
| Rx_LOS Output Voltage- Low | VOL | 0 | 0.8 | V | |
| Rx_LOS Output Voltage- High | VOH | 2 | Vcc | V | |
| Transmitter (OTP4232-3L): | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Data Rate | B | - | 155 | - | Mb/s |
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm |
| Output Spectral Width | △λ(RMS) | - | - | 4 | nm |
| Average Output Power | Po | -13 | - | -6 | dBm |
| Extinction Ratio | EXT | 10 | - | - | dB |
| Data Input Voltage-High | VIHS | Vcc-1.16 | - | Vcc-0.89 | V |
| Data Input Voltage -Low | VILS | Vcc-1.82 | - | Vcc-1.48 | V |
| Supply Current | ICC | - | 90 | 150 | mA |
| Output Optical Eye | Compliant with IEEE802.3Z | ||||
| Receiver (OTP4232-3L): | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Receive Sensitivity | Pmin | - | - | -33 | dBm |
| Maximum Input Power | PMAX | -3 | - | - | dBm |
| Signal Detection-Asserted | SDHIGH | - | - | -34 | dBm |
| Signal Detection-Deserted | SDLOW | -44 | - | - | dBm |
| Hysteresis | - | - | 3 | - | dBm |
| Output High Voltage | VOH | Vcc-1.03 | - | Vcc-0.89 | V |
| Output Low Voltage | VOL | Vcc-1.82 | - | Vcc-1.63 | V |
| Operating Wavelength | λc | 1480 | 1550 | 1580 | nm |
| Supply Current | ICC | - | 80 | 110 | mA |
| Transmitter (OTP4252-3L): | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Data Rate | B | - | 155 | - | Mb/s |
| Centre Wavelength | λc | 1480 | 1550 | 1580 | nm |
| Output Spectral Width | △λ | - | - | 1 | nm |
| Average Output Power | Po | -13 | - | -6 | dBm |
| Extinction Ratio | EXT | 10 | - | - | dB |
| Data Input Voltage-High | VIHS | Vcc-1.16 | - | Vcc-0.89 | V |
| Data Input Voltage -Low | VILS | Vcc-1.82 | - | Vcc-1.48 | V |
| Supply Current | ICC | - | 90 | 150 | mA |
| Output Optical Eye | Compliant with IEEE802.3Z | ||||
| Receiver (OTP4252-3L): | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Receive Sensitivity | Pmin | - | - | -33 | dBm |
| Maximum Input Power | PMAX | -3 | - | - | dBm |
| Signal Detection-Asserted | SDHIGH | - | - | -34 | dBm |
| Signal Detection-Deserted | SDLOW | -44 | - | - | dBm |
| Hysteresis | - | - | 3 | - | dBm |
| Output High Voltage | VOH | Vcc-1.03 | - | Vcc-0.89 | V |
| Output Low Voltage | VOL | Vcc-1.82 | - | Vcc-1.63 | V |
| Operating Wavelength | λc | 1260 | 1310 | 1360 | nm |
| Supply Current | ICC | - | 80 | 110 | mA |
| Absolute Maximum Ratings: (TC=25℃) | |||||
| Parameter | Symbol | Min. | Max. | Unit | |
| Storage Temperature | TST | -40 | 85 | ℃ | |
| Operating Temperature | TIP | 0 | 70 | ℃ | |
| Input Voltage | TCC | 0 | 5 | V | |
| Recommended Operating Environment: | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V |
| Operating Temperature | TOP | 0 | - | 70 | ℃ |
| Timing Characteristics: | |||||
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| TX_DISABLE Assert Time | t_off | 3 | 10 | usec | |
| TX_DISABLE Negate Time | t_on | 0.5 | 1 | msec | |
| Time to Initialize Include Reset of TX_FAULT | t_int | 30 | 300 | msec | |
| TX_FAULT from Fault to Assertion | t_fault | 20 | 100 | usec | |
| TX_DISBEL Time to Start Reset | t_reset | 10 | usec | ||
| Receiver Loss of Signal Assert Time (Off to On) | TA,RX_LOS | 100 | usec | ||
| Receiver Loss of Signal Assert Time (On to Off) | Td,RX_LOS | 100 | usec | ||
| Available Models |
Product Description |
| SC-SFP-FX-T3R5-20km | LC/SFP Single-mode Single Fiber 20km,100M TX1310/RX1550 0°C ~ +70°C |
| SC-SFP-FX-T5R3-20km | LC/SFP Single-mode Single Fiber 20km,100M TX1550/RX1310 0°C ~ +70°C |
| SCI-SFP-FX-T3R5-20km | LC/SFP Single-mode Single Fiber 20km,100M TX1310/RX1550 -40°C ~ +85°C |
| SCI-SFP-FX-T5R3-20km | LC/SFP Single-mode Single Fiber 20km,100M TX1550/RX1310 -40°C ~ +85°C |
| SCI-SFP-FX-T3R5-20km-SC | SC/SFP Single-mode Single Fiber 20km 100M TX1310/1550 -40°C ~ +85°C |
| SCI-SFP-FX-T5R3-20km-SC | SC/SFP Single-mode Single Fiber 20km 100M TX1550/1310 -40°C ~ +85°C |
| SCI-SFP-FX-T3R5-40km | LC/SFP Single-mode Single Fiber 40km,100M TX1310/RX1550 -40°C ~ +85°C |
| SCI-SFP-FX-T5R3-40km | LC/SFP Single-mode Single Fiber 40km,100M TX1550/RX1310 -40°C ~ +85°C |

Industrial-Grade Switches
Carrier-grade Switches
Multifunctional Wireless Series
Industrial Gateway Series
Other Communication Products

