Inquiry
Leave Your Message

SCSWG2-20164MAE-N

20 Port 1G RS-232/485/CAN L2 Managed Industrial Ethernet Switch

◆ Alert Output: Equipped with 1 dedicated channel for power failure alert triggering;
◆ Interface Specifications: Features 4 Gigabit/100Mbps fiber ports plus 16 Gigabit/100Mbps Ethernet copper ports;
◆ Switching Performance: Boasts a 128Gbps switching capacity and a 32Mpps packet forwarding rate;
◆ Serial Communication Protocols: Comes with 2 RS232 ports, 2 RS485 ports and 2 CAN bus interfaces for data transmission;
◆ Built-in Software Capabilities: Compatible with QoS, VLAN, LACP, LLDP, IGMP, DHCP and NTP network functional protocols;
◆ System Management Modes: Enables device configuration and administration via SNMP, Console, WEB, Telnet and SSH access methods;
◆ Network Self-recovery Mechanism: Adopts SC-Ring network protocol with self-recovery latency below 20ms, and is compatible with STP/RSTP network deployment modes;
◆ Structural & Mechanical Design: Delivers IP42 ingress protection grade, supports standard DIN rail mounting and wall-mounted installation;
◆ Power Input Module: Adopts single power input design with AC/DC 110–265V wide voltage range adaptation;
◆ Network Security Mechanisms: Supports IEEE 802.1x authentication protocol, port isolation function, broadcast storm suppression and intelligent traffic regulation control.

    The SCWG2-20164ME-N full domestic intelligent managed industrial Ethernet switch is a high-efficiency network communication terminal built with localized chip solutions. It fully complies with national IT application innovation (Xinchuang) specifications and adopts a completely self-developed and controllable supply chain framework. Optimized elaborately for harsh industrial working scenarios, the product meets industrial-level criteria in hardware structure, protocol compatibility and operational stability. This industrial switch is widely deployed in core infrastructure fields including smart power grids, railway transit and smart manufacturing industries.

    I. Hardware Layout & Interface Design

    This device adopts a composite interface framework, equipped with four 10/100/1000Mbps adaptive SFP fiber ports and sixteen 10/100/1000Mbps adaptive RJ45 copper ports. The single-mode fiber interfaces support a maximum transmission distance of 120km, while the electrical ports feature 10/100/1000Mbps auto-speed adaptation and built-in MDI/MDIX auto-switching function. An optional IEEE 802.3af/at compliant PoE+ power module is configurable, offering up to 30W single-port output to realize synchronous data transmission and power supply for peripheral devices such as IP surveillance cameras and wireless access points (WAPs).

    In terms of industrial extended communication performance, the device reserves dedicated expansion slots that support 2 RS232 serial ports, 2 RS485 serial interfaces and 2 CAN industrial field bus ports. It enables multi-protocol interconnection for programmable logic controllers (PLCs), sensing units and industrial control terminals, realizing seamless fusion of industrial control networks and data transmission networks.

    II. Network Management & Protocol Compatibility

    The device integrates a full-featured intelligent network management system with diversified functional modules:

    - Traffic Management: Supports 4-tier QoS priority queue mechanism based on IEEE 802.1p standards, and DSCP-based QoS priority configuration; compatible with 802.1Q VLAN partitioning, supporting up to 4094 valid VLAN IDs for virtual network segmentation

    - Topology Identification: Achieves automatic network topology scanning and device discovery via LLDP protocol

    - Multicast Control: Adopts IGMP V1/V2/V3 Snooping technology to efficiently suppress broadcast storm risks and optimize network bandwidth utilization

    - Network Management Protocols: Supports SNMP V1/V2c/V3, Syslog log management, as well as CLI-based remote access via SSH/Telnet and intuitive web visual configuration

    - High-Stability Network Architecture: Embeds self-developed SC-Ring redundant ring network protocol, supporting multi-unit cascading ring networking. The link fault detection and network recovery latency is less than 20ms, far exceeding the 1–3s convergence speed of traditional RSTP. It supports multi-ring redundancy protection to guarantee ultra-high availability of industrial control network operation

    III. Industrial-Grade Stable & Reliable Design

    Ultra-Wide Temperature Adaptation: The device can operate stably in a temperature range from -40°C to +75°C, adapting to extreme industrial temperature environments.

    Flexible Power Supply Scheme: It supports single AC/DC 110–265V power input or dual DC 12–56V power input, tolerating ±30% voltage fluctuation. Built with comprehensive protection mechanisms including reverse connection prevention and overcurrent protection, plus multi-dimensional mechanical safety design.

    Durable Structural Design: The robust all-metal casing reaches IP42 protection level. It supports standard DIN rail mounting and wall-mounted installation methods, capable of stable operation in complex industrial environments with vibration, dust accumulation and high humidity.

    Model

    SCSWG2-20164ME-N​

    Software function

    Total switching capacity

    128Gbps

    Total packet forwarding rate

    32Mpps

    MAC ADD

    8K

    MAC functions of exchange

    Supports static configuration and dynamic learning of MAC addresses; Allows viewing and deletion of MAC addresses; Enables configurable MAC address aging time and limits the number of learned MAC addresses; Supports MAC address filtering.

    VLAN

    Supports up to 4,094 VLANs;
    supports port-based VLANs;
    supports VLANs compliant with the 802.1Q standard.

    Spanning tree

    Supports STP Spanning Tree Protocol;
    supports RSTP Rapid Spanning Tree Protocol;

    Ring Network Protocol

    The SC-Ring self-healing time is <20 ms;

    Multicast Control

    Support IGMP v1/v2/v3;
    Support IGMP Snooping;

    Storm Suppression

    Supports suppression of broadcast, multicast, and unicast

    QoS

    Supports traffic classification based on fields in L2/L3/L4 protocol headers;
    supports CAR traffic limiting;
    supports 802.1P/DSCP priority re-marking;
    supports traffic monitoring and traffic shaping.

    Security Features

    Supports suppression of multicast, broadcast, and unknown unicast traffic;
    supports port isolation;
    supports port rate limiting; supports port mirroring;
    supports IEEE 802.1x authentication.

    Reliability

    Optionally supports 1+1 power backup and static/LACP mode link aggregation;
    supports single-port loopback protection.  

    System maintenance

    Supports uploading/downloading configuration files;
    supports uploading upgrade packages;
    supports web-based restoration to factory settings;
    supports system logging functionality;
    supports viewing DDM optical module information  

    Administration of networks

    Supports web interface management (via HTTP and HTTPS protocols);
    supports CLI interface management;
    supports Telnet remote management;
    supports SSH 2.0;
    supports SNMP network management;
    supports LLDP;
    supports NTP client.
    Spec.

    Port Description

    16*10/100/1000M Ethernet electrical port
    4*100/1000M SFPOptical port

    Mechanical Parameter

    Physical dimensions (height × width × depth):168mm×140mm×70mm
    Installation method: Standard DIN card rail mounting
    Cooling system: Aluminum alloy single-rib chassis surface cooling   Fanless design
    Protection rating: IP42

    Power Parameter

    AC/DC:110V-240V; (either-or )  

    Status Indicator Light

    Operation indicator light: RUN   Power indicator light: P1/P2 interface indicator lights: Link, ACT (optical port, electrical port)

    POE(Optional)

    PoE Features: Supports the IEEE 802.3af/at power supply standard (15.4W/30W); Input voltage: DC 48–56V; Power supply modes: 1/2+; 3/6- (output); Supports POE watchdog, automatic port device detection, and port device restart.

    Power outage alarm

    Supports single-channel power failure alarm

    work environment

    Working temperature/humidity: -40°C to 75°C, 10% to 90% without condensation; Storage temperature/humidity: -40°C to 85°C, 5% to 95% without condensation

    Warranty

    MTBF >100000h
    Warranty period: 5 years

    EMC standard

    EN 61000-4-2 (ESD): ±8 kV contact discharge, ±15 kV air discharge
    EN 61000-4-3 (Electromagnetic field): 10 V/m (80–1000 MHz)
    EN 61000-4-6 (Conducted immunity): 3 V (10 kHz–150 kHz), 10 V (150 kHz–80 MHz)
    EN 55022: EN 55022 Class A
    image
    Available Models Gigabit Copper Port Gigabit SFP Power Supply
    SCSWG2-20164MEA-N 16 4 110-265VAC/VDC power supply

    Make An AppointmentLeave Your Message