-
Q1 What are the advantages of industrial managed switches compared with ordinary switches?
+
Adopt industrial-grade wide temperature design, dust-proof, anti-interference, lightning and static protection. It supports ring network protection and complete network management functions, suitable for harsh industrial environments and long-time stable operation.
-
Q2 How do managed switches prevent network loops?
+
Support RSTP, MSTP and other spanning tree protocols. It can automatically block redundant links, prevent broadcast storms, and ensure stable operation of multi-ring networking.
-
Q3 What is the purpose of VLAN division?
+
Isolate different service networks, reduce broadcast interference, improve network security, and optimize overall forwarding performance.
-
Q4 Why do switch ports frequently flash and drop offline?
+
It may be caused by poor cable contact, unqualified network cables or optical fibers, mismatched speed/duplex, electromagnetic interference, network loop vibration and hardware aging.
-
Q5 How to solve slow network speed and packet loss after long-term operation?
+
Check for broadcast storms and frequent TC topology changes. Enable storm suppression, edge port and TC protection to reduce CPU pressure and network fluctuation.
-
Q6 Can MSTP and RSTP be used in hybrid networking?
+
They are compatible with each other. However, for complex multi-ring networks, unified spanning tree configuration is recommended to avoid abnormal port blocking and service disconnection.
-
Q7 How to modify the switch login account and password?
+
Enter global configuration mode, create local user accounts, set new passwords, enable local authentication, and save configuration to avoid loss after restart.
-
Q8 Do industrial switches need grounding?
+
Yes. Reliable grounding can effectively resist lightning, static electricity and EMC interference, and reduce equipment crash and port damage.
-
Q9 How to quickly check IP address conflicts?
+
Clear ARP cache, ping the whole network segment in batches, and check the ARP table. If one IP corresponds to multiple MAC addresses, there is an IP conflict.
-
Q10 Trunk port cannot communicate across devices, how to deal with it?
+
Confirm that the Trunk port releases the required VLANs, ensure consistent configuration on both ends, and check whether the port is blocked by spanning tree.
-
Q11 PoE port no power output, cameras and APs cannot start?
+
Check if PoE function is enabled, confirm terminal power consumption does not exceed the load, use standard network cables, and turn on PoE compatibility mode for special PD devices.
-
Q12 PoE power supply is unstable and intermittent?
+
Long transmission distance, poor cable quality, excessive power load or high ambient temperature will trigger over-current and over-temperature protection, resulting in unstable power supply.
-
Q13 Will PoE switches burn terminal devices?
+
PoE switches support automatic PD detection, and only supply power to compliant devices. Equipment damage is mainly caused by wrong wiring and high-voltage intrusion.